July 12, 2003 Hobby Town

I just took the car out to try to see how it would run. Didn't run bad, but the back pin that goes through the A-Arm came out earlier in the day, then in the first heat race and the second one also, so I didn't even run the main, as I knew it would come out again. Not sure if the pin is too short or what. I will check in the pro kit and see if they put a longer pin in it, or it could be that it needs the aluminum blocks that you can tighten the allen screw into the pin to try to hold it better. Need to take the car apart and will do that this week, as I am just playing around with it now to try to work all the bugs out.

So, it was another learning experience, but the car ran pretty good over all. Plenty of power for a track like that.